Exercises in simulation with LabVIEW Simulation Module

Here is a figure of a blending tank: http://techteach.no/kybsim/blending_tank/blending_tank.html. The mathematical model of the tank is assumed as

Vd(c_A)/dt = w_A - qc_A

Implement a simulator of the tank in LabVIEW Simuation Module. (Use the same parameter values as shown on the figure of the tank.)

[Home page of the control engineering part]

Updated February 17, 2006 by Finn Haugen. E-mail: finn@techteach.no.